Home > Press > ORNL recipe for oxide interface perfection opens path to novel materials
Abstract:
By tweaking the formula for growing oxide thin films, researchers at the Department of Energy's Oak Ridge National Laboratory achieved virtual perfection at the interface of two insulator materials.
This finding, published in the journal Advanced Materials, could have significant ramifications for creation of novel materials with applications in energy and information technologies, leading to more efficient solar cells, batteries, solid oxide fuel cells, faster transistors and more powerful capacitors.
The research team, led by ORNL's Ho Nyung Lee, demonstrated that a single unit cell layer of lanthanum aluminate grown on a strontium titanate substrate is sufficient to stabilize a chemically and atomically sharp interface. A unit cell is the smallest group of atoms that possess the properties of a crystalline material.
"This means that we can now create new properties by precisely conditioning the boundary in the process of stacking different oxides on top of each other," said Lee, a member of the Materials Science and Technology Division.
What's especially noteworthy is that a layer even one unit cell thick could serve as a buffer and dramatically improve the interface quality.
For this research, Lee and colleagues used pulsed laser deposition to deposit lanthanum aluminate thin films on strontium titanate substrates. They were able to demonstrate that a mundane variable such as the oxygen pressure during deposition of lanthanum aluminate is the key factor for achieving atomically sharp interfaces and changing the interface properties on a single unit cell level. Importantly, this finding is not limited to fine-tuning this particular interface, but also applies to a broad range of oxide heterostructures in a class of minerals known as perovskites.
The discovery of electrical properties in oxides - ordinarily insulators - has generated excitement and potentially creates the possibility that oxide electronics could become an alternative to the current semiconductor technology based on silicon.
Making this finding possible was Argonne National Laboratory's Advanced Photon Source and the extreme brightness of synchrotrons that allowed scientists to study the structure and composition at the interface.
"The sophisticated surface X-ray diffraction methods available at the Advanced Photon Source were key to zeroing in on the origin of the interface behavior," said co-author and colleague Gyula Eres.
While previous research with lanthanum aluminate thin film growth used low oxygen pressures, Lee and colleagues systematically explored the effects of oxygen pressure in a wide range. They determined that a shielding layer of lanthanum aluminate grown at high oxygen pressure followed by continued growth at a lower pressure resulted in a highly ordered atomically and chemically sharp - essentially defect-free -- interface.
Other ORNL authors of the paper, titled "Atomic Layer Engineering of Perovskite Oxides for Chemically Sharp Heterointerfaces," are Woo Seok Choi, the first author, Christopher Rouleau and Sung Seok Seo. Other institutions contributing to the paper are the University of Kentucky, Argonne National Laboratory and the University of Science and Technology of China.
Funding for this research was provided by the DOE Office of Science, which also supports the Advanced Photon Source. The Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov. UT-Battelle manages ORNL for DOE's Office of Science.
####
For more information, please click here
Contacts:
Ron Walli
865-576-0226
Copyright © DOE/Oak Ridge National Laboratory
If you have a comment, please Contact us.Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
Related News Press |
News and information
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Laboratories
A battery’s hopping ions remember where they’ve been: Seen in atomic detail, the seemingly smooth flow of ions through a battery’s electrolyte is surprisingly complicated February 16th, 2024
NRL discovers two-dimensional waveguides February 16th, 2024
Thin films
Utilizing palladium for addressing contact issues of buried oxide thin film transistors April 5th, 2024
Govt.-Legislation/Regulation/Funding/Policy
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025
Chainmail-like material could be the future of armor: First 2D mechanically interlocked polymer exhibits exceptional flexibility and strength January 17th, 2025
Chip Technology
New ocelot chip makes strides in quantum computing: Based on "cat qubits," the technology provides a new way to reduce quantum errors February 28th, 2025
Enhancing transverse thermoelectric conversion performance in magnetic materials with tilted structural design: A new approach to developing practical thermoelectric technologies December 13th, 2024
Bringing the power of tabletop precision lasers for quantum science to the chip scale December 13th, 2024
Discoveries
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Announcements
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Battery Technology/Capacitors/Generators/Piezoelectrics/Thermoelectrics/Energy storage
Leading the charge to better batteries February 28th, 2025
Enhancing transverse thermoelectric conversion performance in magnetic materials with tilted structural design: A new approach to developing practical thermoelectric technologies December 13th, 2024
Breakthrough brings body-heat powered wearable devices closer to reality December 13th, 2024
Fuel Cells
Current and Future Developments in Nanomaterials and Carbon Nanotubes: Applications of Nanomaterials in Energy Storage and Electronics October 28th, 2022
Solar/Photovoltaic
KAIST researchers introduce new and improved, next-generation perovskite solar cell November 8th, 2024
Groundbreaking precision in single-molecule optoelectronics August 16th, 2024
Development of zinc oxide nanopagoda array photoelectrode: photoelectrochemical water-splitting hydrogen production January 12th, 2024
Shedding light on unique conduction mechanisms in a new type of perovskite oxide November 17th, 2023
![]() |
||
![]() |
||
The latest news from around the world, FREE | ||
![]() |
![]() |
||
Premium Products | ||
![]() |
||
Only the news you want to read!
Learn More |
||
![]() |
||
Full-service, expert consulting
Learn More |
||
![]() |