Nanotechnology Now

Our NanoNews Digest Sponsors
Heifer International



Home > Press > Wireless nano sensors could save bridges, buildings

Abstract:
Could inexpensive wireless sensors based on nanotechnology be used to alert engineers to problematic cracks and damage to buildings, bridges, and other structures before they become critical? A feasibility study published in the International Journal of Materials and Structural Integrity would suggest so.

Wireless nano sensors could save bridges, buildings

Posted on April 9th, 2010

Mohamed Saafi of the Department of Construction Engineering and Management, at North Dakota State University, in Fargo, and colleagues at the National Institute of Applied Sciences, in Tunisia, together with a team at the Department of Engineering Technology, at Alabama A&M University, point out that civil structures are prone to continuous and uncontrollable damage processes during their designed service lifespan. These damaging processes might be due to weather, aging of materials, earth tremors, and a lack of maintenance.

A continuous monitoring system is needed to improve safety. Unfortunately, the costs and required time expenditure often mean monitoring is not carried out in a timely manner and trivial problems, such as small cracks and fissures, ultimately become serious conditions that threaten the integrity of a structure. The researchers suggest that nanotechnology and wireless systems could be the answer.

As a proof of concept, the researchers have developed and evaluated two types of wireless devices for the remote monitoring of concrete structures. The devices are sensors based on microelectromechanical systems, MEMS, and were designed to monitor temperature and moisture within the concrete. Long gauge nanotube sensors were employed for crack detection in the feasibility study. MEMS and nanosensors have already been used in a wide range of engineering and science fields such as transportation, communication, military and medicine. Their use in civil engineering is a new application with great potential.

"If designed properly, wireless MEMS and nanotechnology-based sensors could be used as embedded components to form self-sensing concrete structures," the team explains. Such devices would gather and transmit information about the health of a structure by detecting the early formation of tiny cracks and measuring the rate of key parameters, such as temperature, moisture, chloride, acidity and carbon dioxide levels each of which might reflect a decrease in structural integrity.

"Information obtained from such monitoring techniques would allow the owners to make critical decisions regarding operation, maintenance, repair and replacement under financial constraints," the team says.

####

For more information, please click here

Contacts:
Mohamed Saafi

256-683-1839

Copyright © Eurekalert

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:
Delicious Digg Newsvine Google Yahoo Reddit Magnoliacom Furl Facebook

Related News Press

News and information

INRS and ELI deepen strategic partnership to train the next generation in laser science:PhD students will benefit from international mobility and privileged access to cutting-edge infrastructure June 6th, 2025

Electrifying results shed light on graphene foam as a potential material for lab grown cartilage June 6th, 2025

Quantum computers simulate fundamental physics: shedding light on the building blocks of nature June 6th, 2025

A 1960s idea inspires NBI researchers to study hitherto inaccessible quantum states June 6th, 2025

Possible Futures

Ben-Gurion University of the Negev researchers several steps closer to harnessing patient's own T-cells to fight off cancer June 6th, 2025

Researchers unveil a groundbreaking clay-based solution to capture carbon dioxide and combat climate change June 6th, 2025

Cambridge chemists discover simple way to build bigger molecules – one carbon at a time June 6th, 2025

A 1960s idea inspires NBI researchers to study hitherto inaccessible quantum states June 6th, 2025

MEMS

Bosch launches longevity program for industrial and IoT applications: High-performance accelerometer, IMU and pressure sensor with 10-year availability July 23rd, 2020

CEA-Leti Develops Tiny Photoacoustic-Spectroscopy System For Detecting Chemicals & Gases: Paper at Photonics West to Present Detector that Could Cost 10x Less Than Existing Systems and Prompt Widespread Use of the Technology February 4th, 2020

MEMS & Sensors Executive Congress Technology Showcase Finalists Highlight Innovations in Automotive, Biomedical and Consumer Electronics: MSIG MEMS & Sensors Executive Congress – October 22-24, 2019, Coronado, Calif. October 1st, 2019

ULVAC Launches Revolutionary PZT Piezoelectric Thin-film Process Technology and HVM Solution for MEMS Sensors/Actuators: Enabling Reliable, High-quality Film Production for Next Generation Devices August 16th, 2019

Nanotubes/Buckyballs/Fullerenes/Nanorods/Nanostrings

Enhancing power factor of p- and n-type single-walled carbon nanotubes April 25th, 2025

Chainmail-like material could be the future of armor: First 2D mechanically interlocked polymer exhibits exceptional flexibility and strength January 17th, 2025

Innovative biomimetic superhydrophobic coating combines repair and buffering properties for superior anti-erosion December 13th, 2024

Catalytic combo converts CO2 to solid carbon nanofibers: Tandem electrocatalytic-thermocatalytic conversion could help offset emissions of potent greenhouse gas by locking carbon away in a useful material January 12th, 2024

Sensors

Quantum sensors tested for next-generation particle physics experiments: New research shows that the specialized sensors can detect particles more precisely April 25th, 2025

Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025

UCF researcher discovers new technique for infrared “color” detection and imaging: The new specialized tunable detection and imaging technique for infrared photons surpasses present technology and may be a cost-effective method of capturing thermal imaging or night vision, medica December 13th, 2024

Nanotechnology: Flexible biosensors with modular design November 8th, 2024

Announcements

INRS and ELI deepen strategic partnership to train the next generation in laser science:PhD students will benefit from international mobility and privileged access to cutting-edge infrastructure June 6th, 2025

Electrifying results shed light on graphene foam as a potential material for lab grown cartilage June 6th, 2025

Quantum computers simulate fundamental physics: shedding light on the building blocks of nature June 6th, 2025

A 1960s idea inspires NBI researchers to study hitherto inaccessible quantum states June 6th, 2025

Construction

Temperature-sensing building material changes color to save energy January 27th, 2023

Strain-sensing smart skin ready to deploy: Nanotube-embedded coating detects threats from wear and tear in large structures July 15th, 2022

A sunlight-driven “self-healing” anti-corrosion coating May 27th, 2022

Polymer fibers with graphene nanotubes make it possible to heat hard-to-reach, complex-shaped items February 11th, 2022

NanoNews-Digest
The latest news from around the world, FREE




  Premium Products
NanoNews-Custom
Only the news you want to read!
 Learn More
NanoStrategies
Full-service, expert consulting
 Learn More











ASP
Nanotechnology Now Featured Books




NNN

The Hunger Project