Home > Press > A new way of making complex structures in thin films: Self-assembling materials can form patterns that might be useful in optical devices
![]() |
Scanning electron microscope images of the crystal structure of the block copolymer material, illustrating their unusual quasicrystal symmetries. Regions with different symmetry properties are highlighted in different colors, and examples of the different patterns, which resemble some ancient tiling patterns, are shown in the accompanying diagrams. Illustration courtesy of the researchers. |
Abstract:
Self-assembling materials called block copolymers, which are known to form a variety of predictable, regular patterns, can now be made into much more complex patterns that may open up new areas of materials design, a team of MIT researchers say.
The new findings appear in the journal Nature Communications, in a paper by postdoc Yi Ding, professors of materials science and engineering Alfredo Alexander-Katz and Caroline Ross, and three others.
"This is a discovery that was in some sense fortuitous," says Alexander-Katz. "Everyone thought this was not possible," he says, describing the team's discovery of a phenomenon that allows the polymers to self-assemble in patterns that deviate from regular symmetrical arrays.
Self-assembling block copolymers are materials whose chain-like molecules, which are initially disordered, will spontaneously arrange themselves into periodic structures. Researchers had found that if there was a repeating pattern of lines or pillars created on a substrate, and then a thin film of the block copolymer was formed on that surface, the patterns from the substrate would be duplicated in the self-assembled material. But this method could only produce simple patterns such as grids of dots or lines.
In the new method, there are two different, mismatched patterns. One is from a set of posts or lines etched on a substrate material, and the other is an inherent pattern that is created by the self-assembling copolymer. For example, there may be a rectangular pattern on the substrate and a hexagonal grid that the copolymer forms by itself. One would expect the resulting block copolymer arrangement to be poorly ordered, but that's not what the team found. Instead, "it was forming something much more unexpected and complicated," Ross says.
There turned out to be a subtle but complex kind of order -- interlocking areas that formed slightly different but regular patterns, of a type similar to quasicrystals, which don't quite repeat the way normal crystals do. In this case, the patterns do repeat, but over longer distances than in ordinary crystals. "We're taking advantage of molecular processes to create these patterns on the surface" with the block copolymer material, Ross says.
This potentially opens the door to new ways of making devices with tailored characteristics for optical systems or for "plasmonic devices" in which electromagnetic radiation resonates with electrons in precisely tuned ways, the researchers say. Such devices require very exact positioning and symmetry of patterns with nanoscale dimensions, something this new method can achieve.
Katherine Mizrahi Rodriguez, who worked on the project as an undergraduate, explains that the team prepared many of these block copolymer samples and studied them under a scanning electron microscope. Yi Ding, who worked on this for his doctoral thesis, "started looking over and over to see if any interesting patterns came up," she says. "That's when all of these new findings sort of evolved."
The resulting odd patterns are "a result of the frustration between the pattern the polymer would like to form, and the template," explains Alexander-Katz. That frustration leads to a breaking of the original symmetries and the creation of new subregions with different kinds of symmetries within them, he says. "That's the solution nature comes up with. Trying to fit in the relationship between these two patterns, it comes up with a third thing that breaks the patterns of both of them." They describe the new patterns as a "superlattice."
Having created these novel structures, the team went on to develop models to explain the process. Co-author Karim Gadelrab PhD '19, says, "The modeling work showed that the emergent patterns are in fact thermodynamically stable, and revealed the conditions under which the new patterns would form."
Ding says "We understand the system fully in terms of the thermodynamics," and the self-assembling process "allows us to create fine patterns and to access some new symmetries that are otherwise hard to fabricate."
He says this removes some existing limitations in the design of optical and plasmonic materials, and thus "creates a new path" for materials design.
So far, the work the team has done has been confined to two-dimensional surfaces, but in ongoing work they are hoping to extend the process into the third dimension, says Ross. "Three dimensional fabrication would be a game changer," she says. Current fabrication techniques for microdevices build them up one layer at a time, she says, but "if you can build up entire objects in 3-D in one go," that would potentially make the process much more efficient.
###
The research was funded by the Office of General Sciences of the U.S. Department of Energy. The team also included graduate student Hejin Huang.
####
For more information, please click here
Contacts:
Sarah McDonnell
617-827-7637
Copyright © Massachusetts Institute of Technology
If you have a comment, please Contact us.Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
Related News Press |
News and information
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Plasmonics
Unveiling the power of hot carriers in plasmonic nanostructures August 16th, 2024
Thin films
Utilizing palladium for addressing contact issues of buried oxide thin film transistors April 5th, 2024
Understanding the mechanism of non-uniform formation of diamond film on tools: Paving the way to a dry process with less environmental impact March 24th, 2023
New study introduces the best graphite films: The work by Distinguished Professor Feng Ding at UNIST has been published in the October 2022 issue of Nature Nanotechnology November 4th, 2022
Govt.-Legislation/Regulation/Funding/Policy
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025
Chainmail-like material could be the future of armor: First 2D mechanically interlocked polymer exhibits exceptional flexibility and strength January 17th, 2025
Possible Futures
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Self Assembly
Diamond glitter: A play of colors with artificial DNA crystals May 17th, 2024
Liquid crystal templated chiral nanomaterials October 14th, 2022
Nanoclusters self-organize into centimeter-scale hierarchical assemblies April 22nd, 2022
Atom by atom: building precise smaller nanoparticles with templates March 4th, 2022
Optical computing/Photonic computing
Groundbreaking research unveils unified theory for optical singularities in photonic microstructures December 13th, 2024
Groundbreaking precision in single-molecule optoelectronics August 16th, 2024
Discoveries
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Announcements
Closing the gaps — MXene-coating filters can enhance performance and reusability February 28th, 2025
Rice researchers harness gravity to create low-cost device for rapid cell analysis February 28th, 2025
Interviews/Book Reviews/Essays/Reports/Podcasts/Journals/White papers/Posters
Leading the charge to better batteries February 28th, 2025
Quantum interference in molecule-surface collisions February 28th, 2025
New ocelot chip makes strides in quantum computing: Based on "cat qubits," the technology provides a new way to reduce quantum errors February 28th, 2025
Photonics/Optics/Lasers
Bringing the power of tabletop precision lasers for quantum science to the chip scale December 13th, 2024
Researchers succeed in controlling quantum states in a new energy range December 13th, 2024
Groundbreaking research unveils unified theory for optical singularities in photonic microstructures December 13th, 2024
![]() |
||
![]() |
||
The latest news from around the world, FREE | ||
![]() |
![]() |
||
Premium Products | ||
![]() |
||
Only the news you want to read!
Learn More |
||
![]() |
||
Full-service, expert consulting
Learn More |
||
![]() |