Nanotechnology Now - Press Release: CPI presents ultra‐flexible OTFT device array suitable for foldable AMOLED displays of the future

Home > Press > CPI presents ultra‐flexible OTFT device array suitable for foldable AMOLED displays of the future

Abstract:
The Centre for Process Innovation (CPI) has developed novel backplane fabrication processes to allow the bending of Organic Thin Film Transistors (OTFT) arrays to small radii (1 mm) without a significant reduction in device performance. The work undertaken demonstrates progress towards optimum Organic Semiconductor (OSC)/OTFT processing and performance to enable their integration into ultra‐ flexible active matrix organic light emitting diode AMOLED backplanes. High performance OSC materials with charge mobility suitable for OLED driving were used in the tests on 50 micron thick PEN film.

CPI presents ultra‐flexible OTFT device array suitable for foldable AMOLED displays of the future

Wilton, UK | Posted on January 23rd, 2014

In order to achieve the tight bend radius, the multiple interfaces present in the device stack were optimised to allow good adhesion under the strains experienced in the bending test. Using patterned OSC layers and additional passivation layer processing, display pixel size OTFTs were fabricated and these were repeatedly bent (up to 10,000 times) to a radius of 1 mm, which equates to a strain of 2.5%. Minimal change in the turn on voltage and on current were observed for the elongated cycle test.

This demonstration of bend resistance in high performance OTFT devices is part of ongoing work to integrate these materials into active matrix backplanes for AMOLED. It is expected that within 2014 the first plastic based display demonstrators will be completed using OTFT in project ROBOLED, which has received funding through the Technology Strategy Board.

A paper describing the bend testing and device processing work was delivered at the recent International Display Workshop (IDW) in Sapporo, Japan - see paper number OLED3‐2.

CPI is the UK's National Centre for Printable Electronics. Focused on the
development, scale‐up and commercialisation of printable electronics applications,
CPI is equipped with an extensive range of assets specifically chosen and developed
to allow clients to understand how their products and processes perform under pilot
manufacturing conditions.

####

About The Centre for Process Innovation
The Centre for Process Innovation is a UK‐based technology innovation centre and part of the High Value Manufacturing Catapult. We use applied knowledge in science and engineering combined with state of the art development facilities to enable our clients to develop, prove, prototype and scale up the next generation of products and processes.

Our open innovation model enables clients to develop products and prove processes with minimal risk. We provide assets and expertise so our customers can demonstrate the process before investing substantial amounts of money in capital equipment and training. New products and processes can be shown to be feasible; on paper, in the lab and in the plant before being manufactured at an industrial scale.

By utilising our proven assets and expertise companies can take their products and processes to market faster. There is no down time in production as all of the process development is completed offsite and our technology transfer and engineering teams can help companies to transfer the product or process into full scale production at speed.

For more information, please click here

Contacts:
Steven Bagshaw
Marketing Executive
The Centre for Process Innovation (CPI)
T: +44 (0)1740 625 700
M: +44 (0)777 813 6791

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark: