Nanotechnology Now - Press Release: SEMATECH and Carl Zeiss Demonstrate Mask Pattern Alignment and Registration to Enable Double Patterning Lithography

Home > Press > SEMATECH and Carl Zeiss Demonstrate Mask Pattern Alignment and Registration to Enable Double Patterning Lithography

Abstract:
Next generation overlay metrology system improves photomask registration measurement to advance manufacturing

SEMATECH and Carl Zeiss Demonstrate Mask Pattern Alignment and Registration to Enable Double Patterning Lithography

Albany, NY, and Jena, Germany | Posted on July 30th, 2010

SEMATECH and the Semiconductor Metrology Systems (SMS) division from Carl Zeiss announced today that Zeiss' next-generation photomask registration and overlay metrology system has successfully passed a key development milestone. The jointly developed system - called PROVE™ - demonstrated the measurement capability for advanced photomasks for the 32 nm node and below. In a series of test runs, the key specifications -- 0.5 nm repeatability and 1.0 nm accuracy in image placement, registration and overlay measurement -- were verified.

"The mask pattern placement metrology tool project builds upon an already successful partnership between Carl Zeiss SMS and SEMATECH for past work on mask Aerial Image Metrology Systems (AIMS™) tool platforms. The partnership has resulted in a working metrology tool that is meeting specifications for repeatability, reproducibility, and accuracy at the 32 nm half-pitch node," said Bryan Rice, director of lithography at SEMATECH. "The industry now has the capability to determine smaller image placement errors than could be measured before. Achieving these specifications is a major milestone toward enabling the International Technology Roadmap for Semiconductors (ITRS) mask requirements for the 32 nm node and below. This accomplishment will help to advance the development of photomasks with tighter overlay requirements, demanded by memory devices and double patterning methods."

The performance targets of the tool were driven by the requirements for advanced memory and double exposure/double patterning mask pattern placement and overlay that will help extend 193nm lithography according to the ITRS.

"To achieve the performance specification of the PROVE™ system is a major milestone in the project and crucial for our customers in the mask making industry. The system is based on a completely new developed platform enabling in-die and sub-nanometer pattern placement metrology in a most versatile way. The measurements can be done on arbitrary production features in the active area of the photomask for accurate and cost efficient metrology and is extendable to EUV technology," said Dr. Oliver Kienzle, Managing Director of Carl Zeiss SMS. "We will now roll-out the PROVE™ product with deliveries to our customers."

This technology represents a significant improvement over previous capability due primarily to the incorporation of high-resolution 193nm wavelength imaging optics, a flexible illuminator that maximizes image contrast, a highly versatile in-die registration analysis algorithm, and a state-of-the-art metrology platform. The system can be fully extended to measure EUV photomasks. The tool will play a vital role in enabling next generation mask-making technology.

SEMATECH's Lithography Program is leading the industry in providing critical information about and solutions to current and emerging lithography systems. Carl Zeiss was chosen to develop the system in April 2007 by an evaluation team of mask makers and SEMATECH member companies. Carl Zeiss' proposal included a novel design allowing mask manufacturers to measure position deviation of photomask features with high precision and accuracy. Since that time Carl Zeiss and SEMATECH engineers have partnered to develop the concept into a working metrology tool.

####

About SEMATECH
For 20 years, SEMATECH® (www.sematech.org) has set global direction, enabled flexible collaboration, and bridged strategic R&D to manufacturing. Today, we continue accelerating the next technology revolution with our nanoelectronics and emerging technology partners.

About Carl Zeiss SMT AG
Carl Zeiss SMT is one of the leading manufacturers of lithography optics and light, electron and ion-optical inspection, analysis and measuring systems. Its Semiconductor Metrology Systems Division focuses on a key component in semiconductor manufacturing, the photomask. Core expertise in light and electron optics, complemented by a femto-second laser technology form the foundation of a product portfolio comprising in-die metrology, actinic qualification, repair and tuning of photomasks.

For more information, please click here

Contacts:
SEMATECH Media Contact:
Erica McGill
518-649-1041

Carl Zeiss Media Contact:
Nadine Schütze
+49 3641 64 2242

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark: