Home > Press > Sensitive ultrasound to spot early-stage cancer
Abstract:
European researchers have developed highly sensitive ultrasound equipment that can detect tiny quantities of reflective microbubbles engineered to stick to specific tumour cells. The technique should pick up tumours early and improve patients' chances of survival.
Most of the current diagnostic methods - biopsy analysis, biochemical tests and medical imaging - are not sufficiently sensitive. They frequently return a false negative; the tumour is only discovered when it is much bigger, and too late.
European researchers are developing a new technique that will help medical professionals visualise tiny quantities of pathological tissue in patients. The technology could localise tumours in their very earliest stages of development and help doctors begin treatments much earlier, giving patients a much better chance of survival.
The new approach uses medical ultrasound, a safe technology most commonly used for pre-natal visualisation of the foetus and the imaging of other soft tissues. A probe sends high-frequency acoustic waves into the body and detects how they bounce off the interfaces between different tissues.
To improve the sensitivity of this imaging technique, a sonographer may sometimes inject a so-called contrast agent into patients, which greatly increases the scattering of the acoustic waves back to the probe. For ultrasound imaging, contrast agents are based on ‘microbubbles', micron-sized gas-filled balls that show up brightly on the ultrasound image.
Researchers in the EU-funded TAMIRUT project have developed a microbubble medium that can specifically target and bind to certain pathogenic cells in the body (such as endothelial cells of vessels lining the tumours). Combined with enhanced ultrasound equipment and signal processing capabilities, the system can detect where microbubbles adhere to target cells, and reveal the presence of early-stage tumours.
Working with the pharmaceutical company Bracco Research S.A. in Switzerland, TAMIRUT researchers have developed a way to attach antibodies onto the surface of microbubbles. By selecting an antibody with an affinity for marker molecules found only on target vascular cells, the microbubbles ‘stick' only to the target cells.
But it is not easy to pick up these hotspots on a scan. "We are looking at the very earliest stages of tumour growth, so there are not many cells present expressing the marker of interest," explains Alessandro Nencioni who coordinated the project.
"There may be only three or four microbubbles adhered to a site and current ultrasound equipment is not able to pick these up. Work on the hardware and signal processing is an essential aspect of this project as we seek to develop next-generation ultrasound imaging capabilities."
Strong signals
Esaote, an Italian manufacturer of medical imaging equipment, is working with several research partners and two SMEs: Vermon, a French manufacturer of medical imaging probes, and SignalGeneriX, a small firm based in Cyprus with expertise in signal processing. Their aim is to produce a scanner and a dedicated probe that can transmit and receive ultrasound waves across a wide range of frequencies and wave forms in order to exploit (without any modification) the harmonic components caused by nonlinear scattering of the acoustic wave of the microbubbles.
The scanning equipment must have sufficient processing power to interpret the waves picked up by the probe, update the live image and adjust the transmitted waveforms in real time. Their detecting function is ensured by a specifically developed signal processing methods, able to detect a very limited number of microbubbles (down to a single bubble), to estimate their concentration, and to track their behaviour to get the diagnostic answer searched.
Originally, the project partners thought it would be possible to differentiate between bound and unbound microbubbles by the way they scatter particular ultrasound frequencies and wave forms. However, extensive simulations and laboratory testing have shown that this turns out to be very difficult. Instead, the scientists found a very simple answer: after 10 minutes, the microbubbles that are attached to target cells remain in place while the free microbubbles diffuse away.
The new probe will detect and calculate their local concentration and operators will be able to visualise any areas of high microbubble density within an entire organ. The repetition of this new imaging technique over time could help medical staff to assess the evolution of a tumour, especially its vascularisation.
Using the engineered, targeted microbubble contrast agent, the improved ultrasound hardware and the signal processing, the TAMIRUT team has already demonstrated in simulations the potential of this approach for the early detection of prostate cancer.
"Our approach goes a long way to eliminating or strongly reducing the problem of false-negative diagnosis," says Nencioni, "offering a second degree of evaluation after blood test screening. It is sensitive, specific and you are able to examine the whole organ, which is not possible by biopsy."
This ultrasound method improves accuracy, patient comfort and costs around half that of a biopsy. It could save European healthcare providers up to €250 million each year in biopsy costs alone.
The need for clinical trials of the targeted contrast agent and subsequent approval in humans means that the targeted microbubble agent is unlikely to be available for at least three years. But the improved signal processing algorithms will help to increase the sensitivity of ultrasound equipment, irrespective of the use of these microbubbles.
Esaote is working with the other commercial partners to incorporate the new signal processing features into its medical imaging equipment by the end of 2009.
TAMIRUT project received funding from the ICT strand of the Sixth Framework Programme for research.
####
For more information, please click here
Copyright © ITC Results
If you have a comment, please Contact us.Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
Related News Press |
News and information
Beyond wires: Bubble technology powers next-generation electronics:New laser-based bubble printing technique creates ultra-flexible liquid metal circuits November 8th, 2024
Nanoparticle bursts over the Amazon rainforest: Rainfall induces bursts of natural nanoparticles that can form clouds and further precipitation over the Amazon rainforest November 8th, 2024
Nanotechnology: Flexible biosensors with modular design November 8th, 2024
Exosomes: A potential biomarker and therapeutic target in diabetic cardiomyopathy November 8th, 2024
Nanomedicine
Exosomes: A potential biomarker and therapeutic target in diabetic cardiomyopathy November 8th, 2024
Unveiling the power of hot carriers in plasmonic nanostructures August 16th, 2024
Announcements
Nanotechnology: Flexible biosensors with modular design November 8th, 2024
Exosomes: A potential biomarker and therapeutic target in diabetic cardiomyopathy November 8th, 2024
Turning up the signal November 8th, 2024
Nanofibrous metal oxide semiconductor for sensory face November 8th, 2024
The latest news from around the world, FREE | ||
Premium Products | ||
Only the news you want to read!
Learn More |
||
Full-service, expert consulting
Learn More |
||