Nanotechnology Now - Press Release: Nanopositioner PZ700 with increased life time and freedom from maintenance

Home > Press > Nanopositioner PZ700 with increased life time and freedom from maintenance

Abstract:
After more than one year in long-term test the nanopositioner PZ700 from piezosystem jena do not show any abrasion or breakdown. The nanopositioner PZ700 is designed for dynamic, single axis positioning tasks of objects of all kind with a mass up to 300 g (0.7 lbs). Because of the quadratic, central aperture, the nanopositioner PZ700 is suited for positioning tasks, where the transmission of light is required or for fibers and wires.

Nanopositioner PZ700 with increased life time and freedom from maintenance

Jena, Germany | Posted on September 1st, 2014

During the long-term test, the nanopositioner PZ700 accomplished more than 100 million cycles at the maximum stroke of 700 痠 and a load of 270 g (0.6 lbs). The actuator is driven by a rectangular input signal. Meanwhile, the mechanic components neither show wear nor signs of fatigue. The stroke does not change over the testing period, tilt is on a constant low level.

The nanopositioner PZ700 is characterized by a high number of cycles with constant parameters like tilt, low axial offset, stroke, repeatability etc. Other assets are the freedom of maintenance of the mechanical and electronical components. Therefore a long-term usage without any downtime is possible and the operating time is not disrupted.

####

For more information, please click here

Contacts:
+49) 3641 66880

Theresa Kuntze

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark: