Nanotechnology Now - Press Release: New Malvern publication shows Zetasizer APS analyzes sticky proteins with no cross-contamination

Home > Press > New Malvern publication shows Zetasizer APS analyzes sticky proteins with no cross-contamination

Zetasizer APS from Malvern Instruments

Abstract:
A new application note published on the Malvern Instruments website demonstrates the absence of any cross contamination when using the company's Zetasizer APS (Auto Plate Sampler) to analyze known ‘sticky' proteins. The Zetasizer APS dynamic light scattering (DLS) system enables the automated measurement of multiple samples and has wide application in the rapid screening of proteins. The risk of cross-contamination is a concern to many people when considering automated analysis in a multiwell format and the experiment was designed to thoroughly test the instrument's capabilities. The application note can be downloaded at www.malvern.com/dlsautomation.

New Malvern publication shows Zetasizer APS analyzes sticky proteins with no cross-contamination

Malvern, UK | Posted on October 11th, 2013

Setup and operation of the Zetasizer APS is straightforward and its stringent cleaning protocols are designed to ensure that no cross contamination occurs. The work described in the new application note used familiar protein samples to demonstrate the lack of detectable cross-contamination. Samples included insulin, in both "monomeric" (the insulin hexamer) and "oligomeric" forms, and Abeta, the amyloid beta peptide known for its stickiness and tendency to adhere to plastic. The Abeta sample was present in two forms, fibrillar and oligomeric.

The order in which samples were loaded onto the system was chosen so as to maximize the risk of cross-contamination. The oligomeric insulin was dispensed first using a standard pipette, followed by the small and pure insulin, and then the larger polydisperse Abeta samples. Since large protein aggregates scatter much more light than small pure protein samples, if cross-contamination were to occur the polydisperse Abeta sample would be detected within the small homogenous protein sample. The results show that after running multiple tests, there was no detectable cross contamination.

The Zetasizer APS delivers the same high sensitivity, high specification DLS measurements as other systems in Malvern's established Zetasizer family. The automated processing of samples in multiwell plates enables the generation of high quality DLS data with no user intervention, a major benefit in maximizing productivity. The system's highly practical data display capability allows easy retrieval of results of interest, eliminating the need to manually scan through all measurements. In addition, the Zetasizer APS plate navigator feature acts as a data mapping tool, for rapid screening of results to retrieve the information of most interest and subsequent in-depth investigation of selected data sets.

The separate temperature controls of the plate holder and the measurement cell allow the Zetasizer APS to maintain the protein samples in optimal condition until measurement. In addition, thermal trend measurements between 2°C to 90°C with 0.1°C degree precision can be defined. The plate scheduler allows the user to graphically set up size and thermal trend measurements of various samples from the same plate using a variety of different SOPs.

For further information about the Zetasizer APS, please visit:www.malvern.com/zetasizeraps

Malvern, Malvern Instruments, and Zetasizer are registered trademarks of Malvern Instruments Ltd

####

About Malvern Instruments
Malvern provides the materials and biophysical characterization technology and expertise that enables scientists and engineers to understand and control the properties of dispersed systems. These systems range from proteins and polymers in solution, particle and nanoparticle suspensions and emulsions, through to sprays and aerosols, industrial bulk powders and high concentration slurries. Used at all stages of research, development and manufacturing, Malvern’s materials characterization instruments provide critical information that helps accelerate research and product development, enhance and maintain product quality and optimize process efficiency.

Our products reflect Malvern’s drive to exploit the latest technological innovations and our commitment to maximizing the potential of established techniques. They are used by both industry and academia, in sectors ranging from pharmaceuticals and biopharmaceuticals to bulk chemicals, cement, plastics and polymers, energy and the environment.

Malvern systems are used to measure particle size, particle shape, zeta potential, protein charge, molecular weight, mass, size and conformation, rheological properties and for chemical identification, advancing the understanding of dispersed systems across many different industries and applications.

Headquartered in Malvern, UK, Malvern Instruments has subsidiary organizations in all major European markets, North America, China, Japan and Korea, a joint venture in India, a global distributor network and applications laboratories around the world.

For more information, please click here

Contacts:
For press information, please contact:

Trish Appleton
Kapler Communications
Phoenix House, Phoenix Park
Eaton Socon, Cambridgeshire, PE19 8EP, UK
Tel: +44 (0)1480 471059
Fax: +44 (0)1480 471069

USA contact:

Marisa Fraser
Malvern Instruments Inc.
117 Flanders Road
Westborough, MA 01581-1042 USA
Tel: +1 508 768 6400
Fax: +1 508 768 6403

Please send sales enquiries to:

Alison Vines
Malvern Instruments Ltd
Enigma Business Park, Grovewood Road
Malvern, Worcestershire WR14 1XZ UK
Tel: +44 (0) 1684 892456
Fax: +44 (0) 1684 892789